Spotlight Hobbies


If you want a uniform finish, tape your window in place, then take a small brush, load it with future floor polish and touch it to the edge of the glass. It will wick around the perimeter and fill every void.

Allow it to dry for a day and pull your tape. I use the Tamiya 6mm tape and just tape it in a couple of places. Usually the middle at the top and bottom. I've done a few this way and it works great. Leaving it alone for a day is the toughest part. You could probably speed up the drying by putting it in a dehydrator if you needed to.

Messages In This Thread